Sonix 80 Amp ESC with BEC -3A/5V DC 5.6-26V
Superb Sonix 80Amp ESC great value for money at this price (may need UBEC) if you dont run a seperate REC power supply. Comes with connection pack of deans plug and bullet connectors as shown herein this image


1.4 Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM.
(BLM: BrushLess Motor)
1.5 Size: 70mm (L) * 31mm (W) * 14mm (H).
1.6 Weight:
Pentium-80A: 62g.


2.1 Safety Arming Feature: Regardless the throttle stick position, the motor will not spin after battery connected.
2.2 Throttle Calibration: Throttle range can be configured to provide best throttle linearity, fully compatible with all market available transmitters.
2.3 Programmable Items:
Brake Setting: brake enabled / brake disabled.
Battery Type: Li-xx(Li-ion or LiPo) / Ni-xx(NiMh or NiCd).
Low Voltage Protection Mode(Cutoff Mode): Gradually reduce the output power / Cutoff the output power.
Low Voltage Cutoff Protection Threshold (Cutoff Threshold): low / medium / high.
Start Mode: normal / soft / very soft.
Timing: low / medium / high.
Reset: reset all the programmable items to its default setting.
2.4 Full Protection Features: Low voltage cutoff protection / over-heat protection / throttle signal lost protection.
Advantages
3.1 Military standard capacitor with extreme low resistance is used at voltage input section, this will increase the ability of prevention of unwanted RF Noise/ Interference during flying.
3.2 Extreme low resistance PCB is used at power output section to get the best current endurance capability.
3.3 Big heat sink has a very good cooling effect.
3.4 Microprocessor uses separate voltage regulator IC, with good anti-jamming capability