Item Description

Bantam E-Station 902 Charger
- High-power and high-performance circuit
902 employs the circuit that has maximum output power of 200W. As a result it can charge or discharge up to 32 cells of NiCd/NiMH and 12 series of Lithium batteries with maximum current of 9.9A. Furthermore the cooling system is so efficient that can hold such a power without any trouble of the circuit or the operating programs. If you need more power to discharge the battery of high voltage with high current you can link an external discharge module (ELD150) that is sold separately to the unit.

- Optimized operating software
When charging or discharging, 902 has an 'AUTO' function that set the feeding current or the cell count of Lithium battery automatically. Especially for Lithium batteries, it can prevent the over-charging can lead to an explosion by users fault. Every program in the unit is controlled with mutual links and communicates for every possible error. So it introduces a maximum safety. These can be set at users option.

- 'OUTPUT-2'
The 'OUTPUT-2' can charge NiCd or NiMH battery up to 6 cells with 'OUTPUT-1' simultaneously. It employs the delta-peak voltage detection method not the trickle charge and is independently operated from 'OUTPUT-1'. Do not try to charge Lithium battery at OUTPUT-2.

- Accept various types of Lithium battery
902 can accept three types of Lithium batteries - LiIo, LiPo and LiFe. They have different characteristics by their chemistry. You can select any one of them that you are going to process before the job.

- PWM Motor driver
You can easily break-in or test the motor at 'OUTPUT-1' with a variable feeding voltage, and running time. And also you can check the output power and the consumption of electric current of the motor at real time.

- Lithium 'Fast'/'Storage' mode charge
You can charge Lithium batteries for special purposes. 'Fast' charge reduces the charging time of Lithium battery and 'Storage mode controls the final voltage of battery to be suit for long time storage.

- Monitoring the voltage of individual cell
Unbalance of the voltage of each cell can occur in the Lithium battery pack because of consecutive charge and discharge. Using 'Lithium balancer(PB5 or PB6)', the charger monitors the voltage of each cell and controls the charge and discharge current to equalize the voltage. For this process the charger communicates with the external balancer thru the temperature sensor port.

- Battery data store/load
For users convenience it can store maximum 10 data of battery. You can establish the data contains program setting of the battery to be charged or discharged continually. These data can be called out at any time you need and executed without program setting.

- Cyclic charging/discharging
Perform 1 to 5 cycles of charge>discharge or discharge>charge continually for battery refreshing and balancing.

- PC based analysis using USB communication
For technical expert, 902 offers PC based software can analysis the characteristic of the battery using USB port. It shows a graph of voltage, current, capacity and temperature curves.

- Back-light LCD screen
You can adjust the brightness of LCD display

- Robust outer aluminum case
High-quality aluminum case is durable and very efficient to cool out the internal heat.

Specification
Operating voltage
DC 11~18 volts

Idling current
approx. 100mA

Charge/discharge power
max. 200/50W

NiCd/MH
1~32 cells

LiIo/LiPo/LiFe
1~12 series

Pb
2~ 40V

Charge current 0.1 to 9.9A

Discharge current
0.1 to 9.9A

No. of cycles
1 to 5 times

Battery data memories
up to 10 data

OUTPUT-2
1~8 cells

NiCd/MH
(0.1~2.0A)

External load
R: 1 or 2 Ohms

Motor Driver
max. 20A load

Weight
1050g

Dimension
160x148x60 mm

Lithium battery voltage type
LiIo:3.6V, LiPo:3.7V, LiFe:3.3V

NiCd Delta-peak voltage sensitivity
1 to 15mV

NiMH Delta-peak voltage sensitivity
1 to 15mV

Battery temperature cut-off
20 to 80C or OFF

Waste time between charge/discharge
1 to 60 min.

Trickle charge mode
ON/OFF

Integral timer limit for safety
10 to 720 min.or OFF

Maximum charging capacity limit for safety
10 to 9990mAh or OFF

Key beep and buzzer sound
ON/OFF

Input power low alert
10 to 11V

LCD back-light brightness
10 to 100 %