3800kv Brushless Motor

KV Value :3800KV
No.of cells :2-3 cells
Max Efficiency : 98%
Shaft Diameter :2.3mm
No load current:2.6A
No load RPM :42200
Dimension : 2.3x26x27mm
Weight : 35g (prox.)

Pinion Included Please Specify Size Below

Sonix 30A Brushless ESC + Switchable UBEC 3A 5V/6V

Specifications

1.1 Output: Continues 30A, Burst 40A up to 10 Secs.
1.2 Input Voltage: 5.6V --- 16.8V ( Lithium : 2 – 4s or NiMH/NiCd 5 -12 Cells).
1.3 UBEC Output： 3A (Switch mode) switchable 5V and 6V.
1.4 Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM.
ESC Dimensions 24mm*45mm*11mm
UBEC Dimensions 16.6mm*41.6mm*7.0mm

Features

2.1 Safety Arming Feature: Regardless of the Throttle Stick position, the motor will not engage during Battery connection.
2.2 Throttle Calibration: Throttle range can be configured to provide best throttling linearity, fully compatible with all market available transmitters.
2.3 Programmable Items:
Brake Settings：brake enabled / brake disabled, default is brake disabled
Battery Type：Li-xx(Li-ion or Li-poly) / Ni-xx(NiMh or Nicd)，default is Li-xx.
Low Voltage Protection Mode(Cutoff Mode) ：power reducing / power cutoff, default is power reducing.
Low Voltage Protection Threshold(Cutoff Threshold) ：low / medium / high, default is medium cutoff voltage.
1) For Li-xx battery，number of battery cells are judged automatically，low / medium / high cutoff voltage for each cell are: 2.5V/2.75V/3.0V. For example: 3 Cell Li-Poly, when medium cutoff voltage is set, the cutoff voltage is: 2.75*3=8.25V.
2) For Ni-xx battery, low / medium / high cutoff voltages are 60/65%/70% of the startup voltage. For example: 10 cells NiMH battery, fully charged voltage is 1.44*10=14.4V, when medium cutoff voltage is set, the cutoff voltage is : 14.4*65%=9.4V。
Startup mode: normal / soft / super-soft, default is normal startup.
Timing: low / medium / high, default is medium timing. In normal cases, low timing can be used for most motors. But for high efficiency, we recommend the Low timing for 2 poles motor and Medium timing for 6 poles and above. For higher speed, High timing could be used.
2.4 Full Protection Features: Low-voltage cutoff protection / over-heat protection / throttle signal lost protection.
3 Advantages
3.1 Capacitor with extremely low resistance used on voltage input section, this will increase the ability of prevention of unwanted RF Noise/ Interference during flying.
3.2 Extreme low resistance, super current endurance.
3.3 Microprocessor and BEC use separate voltage regulator IC